TURBOVAC VACUUM PACKER - M40
FLOOR STANDING VACUUM PACKAGING MACHINE
The Turbovac M40 vacuum packer is the new version of the 580STE vacuum packer. It is floor standing and constructed completely from stainless steel. It is part of Turbovac’s M-range of vacuum packers which have been made around the idea of making the packing of several different products (food or non-food) as easy as possible for the operator.
The packer has two seal beams which are 520mm long, they produce a double seal on the vacuum bag and are positioned either side of the vacuum chamber. The distance between the two seal beams is 545mm and can be quickly and easily converted to seal and cut off simply by changing one of the wires on the seal beam.
Servicing the vacuum packer couldn’t be easier, the digital panel has a self-diagnostic control that identifies service needs and possible operational errors.
The M-range of vacuum packers save on packing time because of their full sensor controls and computer assisted vacuum process. The best possible shelf life is also achieved due to the vacuum packers sensor control being accurate to within 1Mbar, enabling the machine to pull the same amount of vacuum on every product, no matter how big or small.
All the electric components of the vacuum packing machine are covered by IP65 dust and water level protection levels, protecting all electronic parts from splash water and dust.
The M40 vacuum packing machine comes complete with either a single phase or three phase Busch 063m3 vacuum pump. Busch pumps are world renown and coat their internal components to extend the life of the vacuum pump.
|External Dimensions (WxDxH)||735x900x1130 mm|
|Usable Chamber Dinensions (WxDxH)||620x505x200 mm|
|Seal bar length||2 x 520mm double seal|
|Machine cycle||20-40 sec|
Standard features on a Turbovac M-Range
- 10-programme digital control panel
- Sensor control
- Soft air
- Filler plates
- Busch vacuum pump
- Double seal